For each segment of the service, just follow the prompts in the green fields in each table.

<aside> 💡

Always check that the controller light works after plugging in the controller!

</aside>

Pre-Service - before 10:00am

Controller panel 1/7 at the line on the label, and Master all the way down.
Bar 100%
Sconce 100%
Chands 100%
Spotlight switch Always off
Track 100%
Closet Always off during service
Edison 100%
Stage Off

Pastoral Call to Worship - at 10:00am

(1 transition)

| Controller panel | Master to 100%

(1/7 slider should already be up to line on label) | | --- | --- | | Bar | 100% | | Sconce | 100% | | Chands | 100% | | Spotlight switch | Always off | | Track | 100% | | Closet | Always off during service | | Edison | 100% | | Stage | Off |

Beginning 1st Worship Set

This one adjustment is killing the platform light that was previously lighting up the pastor.

(1 transition)

Controller panel Master all the way down
Bar 100%
Sconce 100%
Chands 100%
Spotlight
switch Always off
Track 100%
Closet Always off during service
Edison 100%
Stage Off

Pastoral Time / Announcements / Sermon

Execute as soon as the pastor returns to the platform.

(2 transitions)

Controller panel Master quickly up to 100%
Bar 100%
Sconce 100%
Chands 100%
Spotlight switch Always off
Track 100%
Closet Always off during service
Edison 100%
Stage Slide up to 60% VERY slowly

End of Sermon / Transitioning to Response Time

Execute the transition once the preacher has wrapped up the teaching portion.

You'll know the timing as the preacher will be prompting what happens in the response time (prayer, communion, worship, etc.)

(3 transitions)

Controller panel Still on
Bar Very slowly fade out
Sconce 40%
Chands Very slowly fade to 50%
Spotlight switch Always off
Track Very slowly fade out, then switch off
Closet Always off during service
Edison 100%
Stage 60%